Steris-BD-V. Mueller

How to measure instruments

The following measuring definitions can help you choose the right instruments for your needs: Length Length is measured in a straight line from the bottom of the instrument to the tip farthest away (A). On curved and angled instruments, the length is determined by a line drawn from the bottom of the instrument to the tip farthest away (B) . Jaw length In clamps, the usable portion of the jaw is measured in a straight line to the bottom of the serrations (C). On partial occlusion clamps, the jaw length and jaw depth are measured as illustrated (D).

Length

Length

A

B

Jaw Depth

Jaw Length

Jaw Length

The dimensions listed are accurate as of this catalog’s publication date. Slight variations may occur due to metal crafting and finishing operations. Jaw and tip illustrations are approximately actual size unless otherwise noted.

C

D

Conversion table

Inches to centimeters Centimeters to inches

Multiply inches (as decimals) by 2.54

Multiply centimeters by 0.3937

Millimeters to inches

Multiply millimeters by 0.03937

Inches

Millimeters

Inches

Millimeters

1/16

1.588

9/16

14.288

1/8

3.175

5/8

15.875

3/16

4.736

11/16

17.463

1/4

6.350

3/4

19.050

5/16

7.938

13/16

20.638

3/8

9.525

7/8

22.225

7/16

11.113

15/16

23.813

1/2

12.700

1

25.400

9