Workholding Solutions Master Catalog

PRODUCTION VISES workholding solutions

Production Vises – 4"(100mm) Narrow Base

Wt. lbs/Kg

Part No. 49401

30/14

The Narrow Base Vise can be mounted as a stand-alone vise with traditional strap clamps. The narrow base has 2 locating holes for 12mm dowel pins and 2 locating holes for sine xture keys to align vise in T-slots. Keys for inch and metric T-slots shown on page 172. Recessed mounting holes (3) are also provided for top mounting to xture plates with socket head cap screws. Tapped mounting holes (6) are provided for bottom mounting. The slim design allows a high density of vises on machine tables, tombstones, or columns. Maximize exibility by utilizing the Jergens Ball Lock ® Quick Change Mounting System. See page 138.

• Easy to mount to Ball Lock ® or other xture plates

Mounting Dimensions

Universal Base

PRODUCTION VISES

Wt. lbs/Kg

Part No. 49471

30/14

The Universal Base Vise is easily mounted directly to machine tool tables. Slotted mounting holes will match almost any table slot pattern. Location holes are provided for Jergens Sine Fixture Keys, to provide easy and accurate alignment with table slots.

UNIVERSAL BASE PRODUCTION VISE 4" / 100MM

• Easy to mount directly to machine tables

Mounting Holes (2) Plcs: 17/32" [13.5]

6.00 [150]

17/32" (4) Plcs [13.5] Slotted Mounting Holes:

3.13 [80]

2.50 [63.5]

4.00 [100]

1.22 [30]

2.063 [52.5]

6.00 [150]

7.00 [175]

3.370 [85.6]

1.25 [32]

Mounting Dimensions

Locating Holes: .6255 (4) Plcs For Sine Fixture Keys [16]

141

Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com