Workholding Solutions Master Catalog
BALL LOCK ® MOUNTING SYSTEM
WORKHOLDING SOLUTIONS GROUP
INCH BALL LOCK ® COMPONENTS
Ball-Lock Fixture Plate Machining Kits
Jergens fixture plate machining kits consist of extra-long Ball-Lock shanks and spacers. These kits allow a fixture plate to be installed on a subplate with clearance between the plates. When a user is initially building a fixture on a Ball-Lock Fixture plate, this clearance allows cutting tools to break thru the fixture plate without damaging the subplate below. The advantage of this setup is fixture plates can be machined while mounted to the same subplates they will used with in production. Kits include (4) shanks and (4) spacers.
QUICK CHANGE FIXTURING » BALL LOCK ® MOUNTING SYSTEM
Kit Part Number 49244
Fixture Plate Thk. C
Shank Head Thk. D
Shank Head Dia. E
Shank Part Number
Spacer Part Number
Shank Dia.
Spacer Dia. A Spacer Thk. B
49604
49584
13mm
1.625
0.50
0.75
0.25
0.87
49249
49609
49589
16mm
1.75
0.50
0.75
0.32
1.50
49242
49603
49582
20mm
2.00
0.50
1.00
0.38
1.75
49243
49603
49583
20mm
2.00
0.75
0.75
0.38
1.75
49253
49613
49593
25mm
2.375
0.50
1.00
0.38
2.00
Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
22
Made with FlippingBook - Online catalogs